新闻
  • Welcome to our Booth 8136 (NRG Arena Indoor) in OTC 2018!
    Welcome to our Booth 8136 (NRG Arena Indoor) in OTC 2018!

    NAEC will participate in the 2018 OTC in Houston, Texas in the 30 April to 3 May, 2018. Welcome you to visit us in OTC this time! Hope our fabrication solution will give you a deep impression and promote our cooperation by this chance!

  • NAEC Successfully Delivered Project Support for CSOT Advanced-Generation Module
    NAEC Successfully Delivered Project Support for CSOT Advanced-Generation Module

    In a difficult competitive market circumstance, acquiring continuous trust from customers means that recognition of companies and brands, also means stronger market competitiveness. Establish a service system based on customer benefits can win the customer trust continuously.

  • The Implementation of The 19th National Congress of The Communist Party of China --NAEC
    The Implementation of The 19th National Congress of The Communist Party of China --NAEC

    NAEC is an international manufacturing and trade company providing pipe spool/ storage tank/pressure vessel automatic production line and software management system for oil and gas industry. The 19th National Congress points out that "We will expand foreign trade, develop new models and new forms of trade, and turn China into a trader of quality". Foreign trade has become an important part of China's open economy and an important impulse of national economy.

  • Three batches customers from middle east & southeast asia  meet with NAEC this week
    Three batches customers from middle east & southeast asia meet with NAEC this week

    Recently, NAEC has welcomed three batches customers from Singapore, Saudi Arabia and Oman. We have made great efforts on developing Singapore market for many years and this time we got new order from our new Singapore customer, also our regular Saudi Arabia customer reordered our pipe spool fabrication system and we welcomed new Oman customer to negotiate strategic cooperation with each other. This three visiting fully showed NAEC innovative one-stop lean-fabrication solutions' value in energy engineering fabrication and construction, our fabrication system not only is recognized by our customers once by once, but also helps them to increase their operating capability.

  • Successful Acceptance of NAEC Scientific & Technological Transformative Project !
    Successful Acceptance of NAEC Scientific & Technological Transformative Project !

    August 11, 2017, on-site acceptance meeting of Jiangsu Province Major Scientific And Technological Transformative Special Fund Project was held successfully in NAEC's head office.

  • NAEC GAINS ORDER FROM TAIWAN
    NAEC GAINS ORDER FROM TAIWAN

    Recently, Nanjing Auto Electric Co., Ltd (NAEC) signed a contract with one TaiWan company. We are very proud of this success, because this is the first time that our company wins pipe spool lean fabrication system contract from TaiWan enterprise.

  • NAEC has 25 PQR approved and certified by BV
    NAEC has 25 PQR approved and certified by BV

    In last year NAEC has 25 items of PQR were approved and certified by BV.

  • TIG Hot Wire Welding Technology-A More Efficient and Less Cost Technology for Pipe Spool Fabrication
    TIG Hot Wire Welding Technology-A More Efficient and Less Cost Technology for Pipe Spool Fabrication

    TIG welding is Inert Gas (pure Ar) shielded welding technology, which is widely used in welding of high-end industrial sector since its stable arc and high quality welding joint. TIG welding is also widely used in NAEC pipe spool fabrication solution.

  • Redefine The Automatic Welding Of Thick Wall Pipe Spool
    Redefine The Automatic Welding Of Thick Wall Pipe Spool

    Welding is one of the most key technology link of pipe spool prefabrication, also an important issue for fabrication to improve the efficiency and quality.

  • Redefine The Automatic Welding Of Thick Wall Pipe Spool
    Redefine The Automatic Welding Of Thick Wall Pipe Spool

    Welding is one of the most key technology link of pipe spool prefabrication, also an important issue for fabrication to improve the efficiency and quality.

  • Fabrication ensures success, unfabrication spells failure
    Fabrication ensures success, unfabrication spells failure

    To measure the success of project pipe spool prefabrication, we must see if the pipe spool fabrication meets the demand for the project site.

  • Saudi Arabia's company visit NAEC in China
    Saudi Arabia's company visit NAEC in China

    Last week, a Saudi Arabia's company visited NAEC headquarter in China and NAEC's modern manufacturing base in Lishui, Nanjing .

  • EGW Technology and Equipment Introduction
    EGW Technology and Equipment Introduction

    EGW is a kind of GMAW method which is formed by the development of ordinary melting gas welding and Electro-slag Welding.

  • NAEC R&D in Storage Tank Construction
    NAEC R&D in Storage Tank Construction

    NAEC has a strong and active R&D team, who also has professional experience in tank construction. All the storage tank welding and construction equipments are researched and developed by ourselves.

  • Media Report about NAEC
    Media Report about NAEC

    The Malaysia Project Center of Nanjing Auto Electric Co., Ltd (abbreviations: NAEC) put into operation was reported as the cover article, in the No.4, 2016 issue of the authoritative industry journal Petroleum and Chemical Construction.​

  • NAEC High-efficiency Storage Tank Construction Solution
    NAEC High-efficiency Storage Tank Construction Solution

    Sincere NAEC was established, it mainly focused on the development and promotion of automatic tank construction solution for industries of Oil & Gas, Petroleum, and Petrochemical, etc.

  • Automatic TIG Root Pass Technology, NAEC has a special one!
    Automatic TIG Root Pass Technology, NAEC has a special one!

    Russia YAMAL LNG project is the first module manufacturing project of CPOE, which fabricated in Qingdao and assembled in Russia. The process pipe is 190 thousand meters long.

  • Who defines the value of fabrication?
    Who defines the value of fabrication?

    For a long time, the fabrication operator generally thinks that the fabrication work is implemented by themselves

  • NAEC Malaysia Project Center secures order again!
    NAEC Malaysia Project Center secures order again!

    Recently, Nanjing Auto Electric Co., Ltd. (abbreviation: NAEC) Malaysia Project Center has been awarded pipe spool fabrication job of RAPID project again. This is the second order of NAEC Malaysia Project Center since its set up in 2016.

  • TIG root pass and SAW fill and pass-fast speed, good quality
    TIG root pass and SAW fill and pass-fast speed, good quality

    Usually there are a large amount of pipe spool/piping fabrication job in Refinery, Petrochemical, Power Plant or Water Treatment Projects. More and more subcontractors or fabricators have their own modern workshop to do such job to improve working efficiency and better control job quality.

1 2 3