搜索
Search
这是描述信息

Products

/
/
Variabe radius induction preheating device
PRODUCTS
Number of views:
1000

Variabe radius induction preheating device

Retail price
0.0
Market price
0.0
Product serial number
Category
Products
Quantity
-
+
Stock:
0
1
Product description
Parameters
Parameters

For the heating before welding, because the pipeline rotates around the axis under the condition of automatic welding, the traditional winding heating can not meet the requirements, so the variable radius induction preheater heating method is adopted to adapt to the preheating requirements of pipes with different diameters. The induction heater is not in direct contact with the pipeline, so as to ensure the welding of the weld while heating the pipeline. It avoids the problems of traditional heating cable winding weld, which need to pull out the cable for welding, unable to maintain the heating temperature continuously, and difficult to control the temperature between welding layers, and effectively avoids the quality problems.

The variable radius sensor has two specifications, which can adapt to different pipe diameters of 2-12 inch and 12-32 inch respectively. Each type of inductor is made of insulating material with certain strength, which can support the induction heating cable reel in the inductor and control the bending change of radius. The induction heating cable is connected with the extension cable through the special protective aviation plug, and forms a loop with the power supply to heat the workpiece. The structure design of variable radius induction heater is adopted, and the heating cable is installed on the variable radius heater, which greatly reduces the number of heating cables and has low cost. At the same time, the structure design of the variable radius induction heater saves a lot of labor and time for winding and dismantling the heating cable directly on the pipeline.

When the main engine power is satisfied, under some specific working conditions (such as group preheating, two weld preheating at the same time, etc.), one pull two mode can be realized to heat both sides of the weld or two weld joints at the same time.

The system can realize the whole process of heating curve digital recording, using industrial control touch screen, display 6 channels of real-time temperature curve and record and save. The working state of the device is saved in real time, and the USB interface reads the saved data.

This station is suitable for preheating pipes in power station, petroleum, chemical industry, shipbuilding and other industries. It is an efficient auxiliary equipment for pipe processing.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
1/1
Number of views:
1000

Variabe radius induction preheating device

Number of views:
1000
Quantity
-
+
1
Detail
Parameters

For the heating before welding, because the pipeline rotates around the axis under the condition of automatic welding, the traditional winding heating can not meet the requirements, so the variable radius induction preheater heating method is adopted to adapt to the preheating requirements of pipes with different diameters. The induction heater is not in direct contact with the pipeline, so as to ensure the welding of the weld while heating the pipeline. It avoids the problems of traditional heating cable winding weld, which need to pull out the cable for welding, unable to maintain the heating temperature continuously, and difficult to control the temperature between welding layers, and effectively avoids the quality problems.

The variable radius sensor has two specifications, which can adapt to different pipe diameters of 2-12 inch and 12-32 inch respectively. Each type of inductor is made of insulating material with certain strength, which can support the induction heating cable reel in the inductor and control the bending change of radius. The induction heating cable is connected with the extension cable through the special protective aviation plug, and forms a loop with the power supply to heat the workpiece. The structure design of variable radius induction heater is adopted, and the heating cable is installed on the variable radius heater, which greatly reduces the number of heating cables and has low cost. At the same time, the structure design of the variable radius induction heater saves a lot of labor and time for winding and dismantling the heating cable directly on the pipeline.

When the main engine power is satisfied, under some specific working conditions (such as group preheating, two weld preheating at the same time, etc.), one pull two mode can be realized to heat both sides of the weld or two weld joints at the same time.

The system can realize the whole process of heating curve digital recording, using industrial control touch screen, display 6 channels of real-time temperature curve and record and save. The working state of the device is saved in real time, and the USB interface reads the saved data.

This station is suitable for preheating pipes in power station, petroleum, chemical industry, shipbuilding and other industries. It is an efficient auxiliary equipment for pipe processing.

We could not find any corresponding parameters, please add them to the properties table

Related products

Automated Control of High Efficiency Column Stackers Crane for Warehouse As/rs Automated Storage Retrieval System
Automated Control of High Efficiency Column Stackers Crane for Warehouse As/rs Automated Storage Retrieval System
Lean Intelligent Warehousing And Logistics Intelligent Supply Chain Solution Expert
Lean Intelligent Warehousing And Logistics Intelligent Supply Chain Solution Expert
Automatic Racking Four Way Shuttle 4-Direction Robot For Racking Automated Storage System
Automatic Racking Four Way Shuttle 4-Direction Robot For Racking Automated Storage System
Customized Adjusted Heavy Duty Radio Racking Used Pallet & Case for Warehouse Storage
Customized Adjusted Heavy Duty Radio Racking Used Pallet & Case for Warehouse Storage

Contact us

 

 

400-870-1996

Address: No. 1 Zhongxing West Road, Lishui District, Nanjing, Jiangsu, China

Email:auto@autowelds.com

 

NACE

WeChat public number

NACE
NACE
NACE
NACE
NACE
NACE
NACE