Language
这是描述信息
Products:
Homepage
/
/
Post-Welding Heat Treatment Device
Number of views:
1019

Post-Welding Heat Treatment Device

具体详情请点击查看!
Retail price
0.0
Market price
0.0
Number of views:
1019
Product serial number
Quantity
-
+
Stock:
0
Product description
Parameters
参数

Pipeline medium frequency induction heat treatment system is a special heat treatment equipment specially developed for pipeline prefabrication by Nanjing NAEC Automation Co., LTD. This system adopts the principle of medium frequency induction heating, which is specially used for the heat treatment of weld during automatic pipeline welding. It is a special high-efficiency equipment to improve the efficiency of pipeline welding heat treatment and guarantee the welding quality, and is an ideal heat treatment equipment for automatic welding of thick wall pipes. Under certain working conditions, it can also realize one tow two ways, and heat treatment of two welding joints at the same time.

Equipment characteristics

➤ High heating efficiency: 10 minutes can be uniformly heated to 100 ° C, the highest temperature up to 788 ° C.

➤ Low cost of use: a set of induction cables of this equipment can be applied to multi-specification pipelines, which greatly reduces the number of heating cables used and has low cost of use.

➤ High equipment utilization rate: The equipment uses mobile tooling design, the equipment completes a ring gap heat treatment, can manually promote the mobile platform, to the next station for heat treatment work, convenient transport, high equipment utilization rate.

➤ High safety: Equipment operations are completed on the ground, no open fire or thermal radiation operations, effectively reducing the safety risk of operators.

➤ Multiple control thermocouple input: the hottest thermocouple can be controlled when heating and the coldest thermocouple can be controlled when cold to ensure uniform heating and quality.

➤ Insulation failure protection: When the power supply is short-circuited, the system is automatically cut off, and an induction line directly feedbacks the failure state to the power supply.

➤ Digital recording of the whole process of heating curve: industrial touch screen is used to display 6 real-time temperature curves and record and save. Real-time saving of the working state of the equipment, built-in heat treatment special software, USB interface to read and save data.

➤ High efficiency heating technology: The use of medium frequency induction heating technology, can obtain 90% of the heat energy conversion rate, more power formation system, can realize the welding heating needs of large horizontal cylinder.

Water cooling technology: Heat treatment induction cable using water cooling technology, effectively ensure the cable life and heat treatment efficiency and heating uniformity.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Products

Related Products

 Five Axis Flame Plasma Cutting Bevel Station
Five Axis Flame Plasma Cutting Bevel Station
 High Speed IPC Pipe End Bevel Station
High Speed IPC Pipe End Bevel Station
 Single Head Double Drive Automatic Welding Station
Single Head Double Drive Automatic Welding Station
 Composite Groove Automatic Welding Station
Composite Groove Automatic Welding Station
 Tube End High Speed Beveling Machine With Floating Cutter Head Function
Tube End High Speed Beveling Machine With Floating Cutter Head Function
 Lean Prefabricated Management Software
Lean Prefabricated Management Software
 Ring Seam Automatic Welding Equipment (AGW)
Ring Seam Automatic Welding Equipment (AGW)
 Automatic vertical Seam Welding Equipment (EGW)
Automatic vertical Seam Welding Equipment (EGW)
 Angle Seam Automatic Welding Equipment
Angle Seam Automatic Welding Equipment

About 丨 Solution 丨 Products 丨 Technical 丨 Case 丨 News

Address: No.1 Zhongxing West Road, Lishui District, Nanjing City, Jiangsu Province

Copyright © Nanjing Auto Electric Co., Ltd  All Rights Reserved   苏ICP备17023915号-1

这是描述信息

Follow Us

中兴能源